FEATURES/OPERATIONS
Auto lock functions (Automatic
Transmission only)
Parking brake
Set
Release
Pull
Automatic door locks can be programmed to operate
in four different modes.
(1)
Pull slightly
-
-
Doors lock when shifting from “Park.”
Doors lock when shifting from “Park,” and unlock
when shifting into “Park.”
(2)
Push
(3)
-
Doors lock when shifting from Park, and unlock
when the ignition switch is turned to the “ACC” or
“LOCK” position.
Lower
-Deactivated; auto lock function cancelled.
Seat adjustments-Front
Refer to the Owner’s Manual for more details.
Automatic Transmission (if equipped)
P
R
N
D
2
L
Park
1
Reverse
Neutral
Drive
Second gear
First gear
Position
Height crank (driver side only)
Seatback angle
Overdrive switch
1
The ignition switch must be ON and the brake
pedal depressed to shift from “Park.”
Seat adjustments-Rear
Downshifting increases power going uphill, or
provides engine braking downhill. For best fuel
economy during normal driving conditions, always
drive with the shift lever in the “D” position.
Overdrive switch
Lock release knob
To turn “ON” or “OFF” Depress the overdrive
switch to choose either 3-speed (“OFF”) or 4-speed
(“ON”) operation. During normal driving conditions,
always drive with overdrive “ON.” This allows the
transmission to shift automatically into 4-speed
operation at higher speeds, increasing fuel economy.
If the indicator light on the instrument cluster is
illuminated, overdrive is “OFF.”
Fold down
Turning off the engine will cause overdrive to return
to the default “ON” setting.
8
9
| Categories | Toyota Corolla Manuals, Toyota Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)