FEATURES/OPERATIONS
Auto lock functions
Lights & turn signals
Automatic door locks can be programmed to operate
in four different modes, or turned OFF.
Headlights
AUTO*
-Doors lock when shifting from “Park.”
Headlights
-Doors lock when the vehicle speed goes above
approximately 12 mph.
Parking lights
-
Doors unlock when the engine key is turned to
the “ACC” or “LOCK” position and driver’s door
is opened.
-
Doors unlock when shifting into “Park.”
High beam
Low beam
Automatic Transmission
P
R
N
D
4
3
2
Park
1
*
If equipped
High beam flasher
Reverse
-Daytime Running Light system (if equipped)
Automatically turns on the headlights at a reduced
intensity.
-Automatic light cut off system Automatically turns
lights off after 30 seconds when any of the doors
are opened and closed with the engine off. Lights
may also be turned off by pushing lock button on
remote once more after locking.
Neutral
Drive
Fourth gear
Third gear
Second gear
L
First gear
Turn signals
Right turn
1
The engine switch must be ON, and the brake
pedal depressed to shift from “Park.”
Lane change
Downshifting increases power going uphill, or
provides engine braking downhill. For best fuel
economy during normal driving conditions, always
drive with the shift lever in the “D” position.
Lane change
Left turn
Front fog lights (if equipped)
Turn
Tilt and telescopic steering wheel
Angle
Length
Front fog lights come on only when the headlights
are on low beam.
Lock
release
lever
Headlight beam level control (if equipped)
Up
Up
Hold wheel, push lever down, set angle and length,
and return lever.
Down
Down
Note: Do not attempt to adjust while the vehicle
Higher number will lower the beam.
9
is in motion.
8
| Categories | Toyota Manuals, Toyota Sienna Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2008 Toyota Sienna Reference Owners Guide 5.0 out of 5.0 based on 1 product reviews.