In case of an emergency
OJB048024
1JBA6025
OJB048026
7.
Loosen the wheel lug nuts coun- 8. Place the jack at the front or rear 9. Insert the jack handle into the jack
terclockwise one turn each, but do jacking position closest to the tire and turn it clockwise, raising the
not remove any nut until the tire you are changing. Place the jack vehicle until the tire just clears the
has been raised off the ground. at the designated locations under ground. This measurement is
the frame. The jacking positions
are plates welded to the frame
with two tabs and a raised dot to
index with the jack.
approximately
30 mm (1.2 in).
Before removing the wheel lug
nuts, make sure the vehicle is sta-
ble and that there is no chance for
movement or slippage.
WARNING - Jack location
To reduce the possibility of
injury, be sure to use only the
jack provided with the vehicle
and in the correct jack position;
never use any other part of the
vehicle for jack support.
10. Remove the wheel lug nuts by
turning them counterclockwise,
then remove the wheel.
11. Mount the spare tire into position
and install the wheel lug nuts
with the beveled edge inward.
6
21
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2009 Kia Rio Owners Manual 5.0 out of 5.0 based on 1 product reviews. Very helpful. Gave me all the information i needed and then some. Thank you so much..