FEATURES/OPERATIONS
Auto lock functions
Steering lock release
Automatic door locks can be programmed to operate in four different
modes, or turned OFF.
Smart Key system*
Without Smart Key system
-
-
-
Doors lock when shifting from Park.*
Doors lock when the vehicle speed goes above approximately 12 mph.
Doors unlock when shifting into Park.*
Turn
Turn
Turn
Vehicles without Smart Key system
-Doors unlock when the engine switch is set from “ON” to “ACC” or
“LOCK” and driver’s door is opened.
Vehicles with Smart Key system
Push
-
mode or OFF and driver’s door is opened.
Doors unlock when the “ENGINE START STOP” switch is set to ACCESSORY
*
Gently turn wheel while pressing the ENGINE
START STOP switch. If the lock does not
release, the switch will flash green.
*
Automatic Transmission only
Refer to the Owner’s Manual for more details.
Tilt and telescopic steering wheel
Automatic Transmission (if equipped)
Angle
4
cylinder (2AZ-FE) engine
6 cylinder (2GR-FE) engine
Length
Park*
Reverse
Neutral
Drive
Park*
Reverse
Lock release lever
Neutral
Drive
4
Hold wheel, push lever down, set angle and length, and return lever.
Fourth gear
Third gear
Second gear
First gear
3
Note: Do not attempt to adjust while the vehicle is in motion.
“S” mode
N
Parking brake
Lever type
Pedal type
*
The “ENGINE START STOP”/engine switch must be ON and the brake
pedal depressed to shift from “Park.”
Set
Release
(2)
Push
“S” (Sequential) mode
Pull
(1)
Pull
slightly
Shift the shift lever to “S” position from “D” position.
Floor shift type:
(3)
Lower
+
-
: Upshift (push and release)
: Downshift (pull and release)
Set: Depress
Release: Depress again
Downshifting increases power going uphill, or provides engine braking
downhill. For best fuel economy during normal driving conditions, always
drive with the shift lever in the “D” position.
10
11
| Categories | Toyota Camry Manuals, Toyota Manuals |
|---|---|
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)