You can intervene at any time and switch the
high beams on and off as usual.
The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:
Activating the system
>
In very unfavorable weather conditions,
such as fog or heavy precipitation
1.
Turn the light switch to position 3, refer to
page 83.
>
In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and
wagons; when driving close to train or ship
traffic; and at animal crossings
2.
With the low beams switched on, briefly
push the turn indicator lever in the direction
of the high beam.
The indicator lamp in the instrument >
cluster lights up when the high beams
are activated. The system automati-
In tight curves, on hilltops or in depressions,
in cross traffic or half-obscured oncoming
traffic on highways
cally switches from high beams to low beams
and vice versa in response to oncoming traffic,
traffic ahead of you, and adequate ambient
lighting, e.g. on city streets.
>
In poorly lit towns and cities and in the pres-
ence of highly reflective signs
>
>
At low speeds
When the windshield in front of the interior
rearview mirror is fogged over, dirty or cov-
ered with stickers, etc.
Switching the high beams on and off
manually
>
If the sensor is dirty. Clean the sensor on
the front of the interior rearview mirror using
a cloth moistened with a small amount of
glass cleaner.
Whenever you wish, or when the situation
requires, you can intervene:
>
If the high-beam assistant switches on the
high beams, but you would like to drive with
the low beams, simply switch off the high
beams using the turn indicator lever. This
deactivates the high-beam assistant.
To reactivate the system, briefly push the
turn indicator lever toward the high beams
again.
Fog lamps
>
If the high-beam assistant switches on the
low beams, but you would like to drive with
the high beams, switch on the high beams
as usual. This deactivates the system and
the high beams need to be switched off
manually, if necessary.
To reactivate the system, briefly push the
turn indicator lever toward the high beams
again.
The parking lamps or low beams must
be switched on for the fog lamps to
operate. The green indicator lamp in
the instrument cluster lights up whenever the
fog lamps are on.
>
Use the headlamp flasher as usual with the
low beams switched on.
The fog lamps are switched off while you acti-
vate the headlamp flasher or switch on the high
beams.
System limitations
The high-beam assistant cannot serve as
a substitute for the driver's personal judg-
ment of when to use the high beams. Therefore,
manually switch off the high beams in situations
where this is required to avoid a safety risk.<
If the automatic headlamp control is acti-
vated, the low beams will come on auto-
matically when you switch on the fog lamps.<
86
Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG
| Categories | BMW 3-Series Manuals, BMW M3 Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW 335xi, BMW E92, BMW E93, Convertable, Coupe |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Automotive readers have rated 2010 BMW 3-Series Owners Manual 4.0 out of 4.0 based on 1 product reviews. Easy to use site