WHAT TO DO IN AN EMERGENCY3
13
D060D01A-AAT
D060E01A-AAT
4. Put the Jack in Place
D060F02E-AAT
5. Raising the Car
3
. Loosen Wheel Nuts
Wrench bar
Wheel nut wrench
D060D02MC
D060F02MC
1JBA6025
The wheel nuts should be loosened
slightly before raising the car. To
loosen the nuts, turn the wrench
handle counterclockwise. When doing
this, be sure that the socket is seated
completely over the nut so it cannot
slip off. For maximum leverage, posi-
tion the wrench so the handle is to the
right. Then, while holding the wrench
near the end of the handle, pull up on
it with steady pressure. Do not re-
move the nuts at this time. Just loosen
them about one-half turn.
The base of the jack should be placed
on firm, level ground. The jack should
be positioned as shown in the drawing.
After inserting a wrench bar into the
wheel nut wrench, install the wrench
bar into the jack as shown in the
drawing. To raise the vehicle, turn the
wheel nut wrench clockwise. As the
jack begins to raise the vehicle, double
check that it is properly positioned and
will not slip. If the jack is on soft
ground or sand, place a board, brick,
flat stone or other object under the
base of the jack to keep it from sink-
ing.
Raise the car high enough so that the
fully inflated spare tire can be installed.
| Categories | Hyundai Accent Manuals, Hyundai Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Hyundai Accent Owners Manual 4.3 out of 5.0 based on 3 product reviews. Easy to find what we were looking for
I am glad to get a free manual!
Simple to find what I was looking for.also was quick to download