Maintenance
AUTOMATIC TRANSAXLE FLUID (IF EQUIPPED)
4.
If the fluid level is checked in cold con-
dition (fluid temperature 20~30°C
■
Type A
(68~86°F)
add the fluid to “C” (COLD)
line and then recheck the fluid level
according to the above step 2.
✽
NOTICE
“C” (COLD) range is for reference only
and should NOT be used to determine
the transaxle fluid level.
OTD079038
■
Type B
WARNING - Transaxle fluid
OTD079010
G100100AFD-EU
The transaxle fluid level should be
checked when the engine is at nor-
mal operating temperature. This
means that the engine, radiator,
radiator hose and exhaust system
etc., are very hot. Exercise great
care not to burn yourself during
this procedure.
HOT
Checking the automatic transaxle
fluid level
The
automatic transaxle fluid level
should be checked regularly.
Keep the vehicle on the level ground with
the parking brake applied and check the
fluid level according to the following pro-
cedure.
COLD
OSA077009
1.
Place the shift lever in N (Neutral)
position and confirm the engine is run-
ning at normal idle speed.
3.
Confirm that the fluid level is in the
“HOT” range on the level gauge. If the
fluid level is lower, add the specified
fluid in the fill hole. If the fluid level is
higher, drain the fluid from the drain
hole.
2.
After the transaxle is warmed up suffi-
ciently (fluid temperature 70~80°C
(158~176°F),
for example by 10 min-
utes usual driving, move the shift lever
through all positions then place the
shift lever in N (Neutral) or P (Park)
position.
7
19
| Categories | Kia Forte Manuals, Kia Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 5 out of 5)
Automotive readers have rated 2010 Kia Forte Owners Manual 5.0 out of 5.0 based on 3 product reviews. The car is fine.all this crap you need to download the flipping owners manual is not.
nice catalogue