Maintenance
5.
Maximum permissible inflation
pressure
Tread wear
The tread wear grade is a compara-
WARNING - Tire age
This number is the greatest amount tive rating based on the wear rate of
of air pressure that should be put in the tire when tested under controlled
the tire. Do not exceed the maximum conditions on a specified govern-
permissible inflation pressure. Refer ment test course. For example, a tire
to the Tire and Loading Information graded 150 would wear one-and-a-
label for recommended inflation half times as well on the government
Tires degrade over time, even
when they are not being used.
Regardless of the remaining
tread, it is recommended that
tires generally be replaced after
six (6) years of normal service.
Heat caused by hot climates or
frequent high loading conditions
can accelerate the aging
process. Failure to follow this
warning can result in sudden tire
failure, which could lead to a
loss of control and an accident
involving serious injury or death.
pressure.
course as a tire graded 100.
The relative performance of tires
depends upon the actual conditions
of their use. However, performance
may differ from the norm because of
variations in driving habits, service
practices and differences in road
characteristics and climate.
6.
Maximum load rating
This number indicates the maximum
load in kilograms and pounds that
can be carried by the tire. When
replacing the tires on the vehicle,
always use a tire that has the same
load rating as the factory installed These grades are molded on the
tire.
side-walls of passenger vehicle tires.
The tires available as standard or
optional equipment on Kia vehicles
may vary with respect to grade.
4.
Tire ply composition and material
The number of layers or plies of rub-
ber-coated fabric in the tire. Tire
7.
Uniform tire quality grading
manufacturers also must indicate the Quality grades can be found where
materials in the tire, which include applicable on the tire sidewall
steel, nylon, polyester, and others. between tread shoulder and maxi-
The letter "R" means radial ply con- mum section width.
struction; the letter "D" means diago-
nal or bias ply construction; and the
letter "B" means belted-bias ply con-
struction.
For example:
TREADWEAR 200
TRACTION AA
TEMPERATURE A
6
38
| Categories | Kia Manuals, Kia Sedona Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Kia Sedona Owners Manual 4.3 out of 5.0 based on 3 product reviews. I downloaded the manual for my father, who just purchased a 2010 Sedona. Since the vehicle did not come with a manual, it's nice to know they're site like Need Manual on the internet to assist. The only issue I could see is on the actual manual itself. On page 3/37 the text feature on that page did not appear. The only thing that came up was the rose colored square which looks like a picture of the seats should have appeared. Other than that, I really do appreciate you guys for having the manual online!
thank you