XM CAN (ENG) 7.qxp 4/14/2010 10:59 AM Page 48
Maintenance
3.
4.
Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, consult an authorized
KIA dealer.
✽ NOTICE
If the multi fuse is blown, consult an
authorized KIA dealer.
CAUTION
After checking the fuse panel in the
engine
compartment,
securely
OXM079025
install the fuse panel cover. If not,
electrical failures may occur from
water contact.
G210201AAM
Multi fuse
If the multi fuse is blown, it must be
removed as follows:
1.
2.
3.
Turn off the engine.
Disconnect the negative battery cable.
Remove the fuse panel on the right
side in the engine compartment.
4.
5.
6.
Remove the nuts shown in the picture
above.
Replace the fuse with a new one of the
same rating.
Reinstall in the reverse order of
removal.
7
48
Product Specification
Categories | Kia Manuals, Kia Sorento Manuals |
---|---|
Model Year | 2010 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Want to know more about kia products and its function
Good fast and easy to drive
Kia products are good im satisfied by unit