2010 Toyota Highlander Reference Owners Guide

10_Highlander.qxd
9/10/09  5:18 PM  Page 28
SAFETY AND EMERGENCY FEATURES
Seat belts
Seat belts-Shoulder belt anchor
Take up slack
Too high
Push up, or squeeze
lock release to lower
Keep as low on
hips as possible
Doors-Child safety locks
If belt is fully extended, then retracted even slightly, it cannot be
re-extended beyond that point, unless fully retracted again. This feature
is used to help hold child restraint systems securely.
Rear door
To find more information about seat belts, and how to install a child
restraint system, refer to the Owner's Manual.
Moving the lever to “LOCK” will allow the door to be opened only from
the outside.
Tire Pressure Monitoring (warning)
System
Spare tire & tools
Tool location
Socket
adapter
Jack handle
Wrench
Towing eyelet
Jack
System reset initialization
1.
Push and hold “
until the indicator blinks 3 times.
SET” button
2.
Wait a few minutes to allow
initialization to complete.
Jack handle
Spare tire
After adjusting tire pressures, or after tires have been rotated or
replaced, turn the ignition switch to “ON” and press and hold the
Removing the spare tire
(1)
(2)
(3)
SET” button until indicator blinks three times. Let the vehicle sit for
a few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the  Owner’s Manual for tire
inflation specifications.
If the tire pressure indicator flashes for more than 60 seconds and then
remains on, take the vehicle to your local Toyota dealer.
(1) Remove the cover under the center deck board to find the spare tire
clamp bolt.
(2) Assemble the jack handle.
(3) Put the socket adapter on the spare tire clamp bolt. Loosen the bolt
by turning it counterclockwise with the jack handle.
Note: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not
been initialized recently, setting the tire pressures to factory
specifications should turn off the light.
Refer to the Owner’s Manual for tire changing and jack positioning  
procedures.
28
29
Product Specification
CategoriesToyota Highlander Manuals, Toyota Manuals
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 17 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field