2011 Hyundai H 1 Grand Starex Owners Manual

Maintenance
G201003AEN
G201005AUN
3.
Checking tire life (TIN :Tire
Identification Number)
WARNING - Tire age
Tires  degrade  over  time,  even
when they are not being used.
5. Maximum permissible inflation
pressure
Any tires  that  are over  6 years  old,
based  on  the   manufacturing  date,
(including  the spare  tire)  should be
replaced by  new ones. You  can find
the  manufacturing  date  on  the  tire
sidewall (possibly on the inside of the
wheel),  displaying  the   DOT  Code.
The DOT  Code  is a  series of  num-
bers on a  tire consisting of numbers
and English letters.  The manufactur-
ing date is designated by the last four
digits (characters) of the DOT code.
This number  is the greatest  amount
of air pressure  that should be  put in
the tire. Do not exceed the maximum
permissible inflation pressure.  Refer
to the  Tire and  Loading Information
label   for    recommended    inflation
pressure.
Regardless   of   the  remaining
tread,  it  is  recommended  that
tires generally be replaced after
six (6)  years of normal  service.
Heat caused  by hot climates  or
frequent   high   loading   condi-
tions  can accelerate  the  aging
process.  Failure  to  follow  this
warning  can  result  in   sudden
tire failure,  which could lead  to
a  loss  of control  and  an  acci-
dent involving serious  injury or
death.
G201006AUN
6. Maximum load rating
This number indicates the  maximum
load  in  kilograms  and  pounds  that
can  be   carried  by  the   tire.  When
replacing  the  tires   on  the  vehicle,
always use  a tire that  has the same
load  rating  as  the  factory  installed
tire.
DOT : XXXX XXXX OOOO
The front  part  of the  DOT means  a
plant  code   number,  tire   size  and
tread pattern  and the last  four num-
G201004AEN
bers indicate  week and  year  manu-     4.Tire  ply composition and material
factured.
For example:
DOT  XXXX XXXX  1612  represents
that the tire was produced in the 16th
week of 2012.
The number of layers or plies of  rub-
ber-coated   fabric  in   the  tire.  Tire
manufacturers also must indicate the
materials  in  the  tire,  which include
steel,  nylon,  polyester,  and  others.
The letter  "R" means radial  ply con-
struction; the letter "D" means diago-
nal or  bias ply construction; and  the
letter "B" means belted-bias ply con-
struction.
7
49
Product Specification
Categories Hyundai Manuals, Hyundai H-1 Grand Starex Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 338 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Grand Starex
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field