2011 Hyundai I30 Owners Manual

Maintenance
EMISSION CONTROL SYSTEM
G270000AFD
Caution
for
the
Inspection
and
G270200AFD
The  emission   control  system   of  your
vehicle  is  covered  by  a  written  limited
warranty. Please  see the warranty  infor-
mation contained in the Service Passport
in your vehicle.
Maintenance   Test   (With   Electronic     2. Evaporative emission control
Stability Program (ESP) system)
•  To  prevent the  vehicle  from misfir-
ing   during  dynamometer   testing,
System
The
Evaporative
Emission
Control
System   is   designed   to   prevent   fuel
vapors  from  escaping  into   the  atmos-
phere.
turn
the
Electronic
Stability
Your  vehicle is  equipped  with an  emis-
sion control system  to meet all emission
regulations.
Program (ESP) system off by press-
ing the ESP switch.
•  After  dynamometer testing  is com-
pleted, turn the ESP system back on
by pressing the ESP switch again.
G270201AUN
There  are  three  emission  control  sys-
tems which are as follows.
Canister
Fuel  vapors  generated  inside   the  fuel
tank  are   absorbed  and  stored   in  the
onboard  canister.  When  the  engine  is
running, the fuel  vapors absorbed in  the
canister  are  drawn into  the  surge  tank
through the purge control solenoid valve.
(1)
(2)
(3)
Crankcase emission control system
Evaporative emission control system
Exhaust emission control system
G270100AUN
1. Crankcase emission control
system
The  positive  crankcase  ventilation  sys-
tem is  employed to  prevent air  pollution
caused by  blow-by gases  being emitted
from the crankcase.This system supplies
fresh filtered air to the crankcase through
the air intake hose. Inside the crankcase,
the fresh  air  mixes with  blow-by gases,
which then  pass through the  PCV valve
into the induction system.
In order to  assure the proper function  of
the  emission control  systems,  it is  rec-
ommended   that   you   have   your   car
inspected and  maintained by an  author-
ized HYUNDAI dealer in accordance with
the maintenance schedule  in this manu-
al.
G270202AUN
Purge Control Solenoid Valve (PCSV)
The purge control  solenoid valve is con-
trolled  by   the  Engine  Control   Module
(ECM); when the engine coolant temper-
ature is low during idling, the PCSV clos-
es  so that  evaporated fuel  is  not taken
into the engine. After  the engine warms-
up  during  ordinary   driving,  the  PCSV
opens to introduce evaporated fuel to the
engine.
7
74
Product Specification
Categories Hyundai Manuals, Hyundai i30 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 635 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i30
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field