What to do in an emergency
ROAD WARNING
IN CASE OF AN EMERGENCY
WHILE DRIVING
It should be used whenever emergency
repairs are being made or when the vehi- If the engine stalls at a crossroad
cle is stopped near the edge of a road-
or crossing
way.
If the engine stalls at a crossroad or
Depress the flasher switch with the igni-
crossing, set the shift lever in the N
tion switch in any position. The flasher
(Neutral) position and then push the vehi-
switch is located in the center console
cle to a safe place.
switch panel. All turn signal lights will
flash simultaneously.
If you have a flat tire while driving
If a tire goes flat while you are driving:
•
•
•
The hazard warning flasher operates
whether your vehicle is running or not.
The turn signals do not work when the
hazard flasher is on.
Care must be taken when using the
hazard warning flasher while the vehi-
cle is being towed.
1.Take your foot off the accelerator pedal
and let the vehicle slow down while
driving straight ahead. Do not apply the
brakes immediately or attempt to pull
off the road as this may cause a loss of
control. When the vehicle has slowed
to such a speed that it is safe to do so,
brake carefully and pull off the road.
Drive off the road as far as possible
and park on firm, level ground. If you
are on a divided highway, do not park
in the median area between the two
traffic lanes.
OLM049084
Hazard warning flasher
The hazard warning flasher serves as a
warning to other drivers to exercise
extreme caution when approaching,
overtaking, or passing your vehicle.
6
2
| Categories | Hyundai Manuals, Hyundai Tucson Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Tucson |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)