Features of your vehicle
DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)
WARNING
D120102BEN
Recalling positions from memory
1.
Shift the transmission shift lever into P
(Park) under one of the followings:
The ignition switch is ON.
The driver’s door is opened while the
ignition switch is in the LOCK or ACC
position.
Within 30 seconds after the driver’s
door is closed while the ignition switch
is in the LOCK or ACC position.
To recall the position in memory, press
the desired memory button (1 or 2).
The system will beep once, then the
driver seat, outside rearview mirror
and steering wheel will automatically
adjust to the stored positions.
Never attempt to operate the driver
position memory system while the
vehicle is moving.
•
•
This could result in loss of control,
and an accident causing death,
serious injury, or property damage.
•
Storing positions into memory
using the buttons on the door
2.
OEN036100
D120101AEN
D120000AEN
Storing driver’s seat positions
Shift the transaxle shift lever into P
while the ignition switch is ON.
A driver position memory system is pro-
vided to store and recall the driver seat,
outside rearview mirror and steering
wheel positions with a simple button
operation. By saving the desired positions
into the system memory, different drivers
can reposition the driver seat, outside
rearview mirror and steering wheel based
upon their driving preference. If the bat-
tery is disconnected, the position memo-
ry will be lost and the driving positions
should be restored in the system.
1.
Adjusting one of the control knobs for the
driver seat, outside rearview mirror and
steering wheel while the system is recall-
ing the stored positions will cause the
movement for that component to stop
and move in the direction that the control
knob is moved. Other components will
continue to the recalled position.
2. Adjust
rearview mirror and steering wheel to
positions comfortable for the driver.
the
driver
seat,
outside
3.
4.
Press SET button on the control panel.
The system will beep once.
Press one of the memory buttons (1 or
2)
within 5 seconds after pressing the
SET button. The system will beep
twice when memory has been suc-
cessfully stored.
WARNING
Use caution when recalling adjust-
ment memory while sitting in the
vehicle. Push the seat position con-
trol knob to the desired position
immediately if the seat moves too
far in any direction.
✽
NOTICE
The buzzer sounds 10 times if there is a
malfunction of the memory system.
Have the driver position memory system
checked by an authorized HYUNDAI
dealer.
4
37
| Categories | Hyundai Manuals, Hyundai Veracruz Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Veracruz |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)