Maintenance
4.
Tire ply composition and material
7. Uniform tire quality grading
Traction - AA, A, B & C
The number of layers or plies of rub- Quality grades can be found where The traction grades, from highest to
ber-coated fabric in the tire. Tire man- applicable on the tire sidewall lowest, are AA, A, B and C. Those
ufacturers also must indicate the between tread shoulder and maxi- grades represent the tire’s ability to
mum section width.
materials in the tire, which include
steel, nylon, polyester, and others.The For example: TREAD wear 200
letter "R" means radial ply construc-
tion; the letter "D" means diagonal or
bias ply construction; and the letter "B"
means belted-bias ply construction.
stop on wet pavement as measured
under controlled conditions on speci-
fied government test surfaces of
asphalt and concrete.A tire marked C
may have poor traction performance.
TRACTION AA
TEMPERATURE A
Tread wear
WARNING
The tread wear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
5.
Maximum
pressure
permissible
inflation
The traction grade assigned to
this tire is based on straight-
ahead braking traction tests,
and does not include accelera-
tion, cornering, hydroplaning,
or peak traction characteristics.
This number is the greatest amount conditions on a specified govern-
of air pressure that should be put in ment test course. For example, a tire
the tire. Do not exceed the maximum graded 150 would wear one-and-a-
half times (1½) as well on the gov-
ernment course as a tire graded 100.
permissible inflation pressure. Refer
to the Tire and Loading Information
label for recommended inflation The relative performance of tires
pressure.
depends upon the actual conditions
of their use, however, and may
depart significantly from the norm
due to variations in driving habits,
service practices and differences in
road characteristics and climate.
6.
Maximum load rating
This number indicates the maximum
load in kilograms and pounds that can
be carried by the tire. When replacing
the tires on the vehicle, always use a
tire that has the same load rating as
the factory installed tire.
These grades are molded on the
side-walls of passenger vehicle tires.
The tires available as standard or
optional equipment on your vehicle
may vary with respect to grade.
7
45
| Categories | Hyundai Manuals, Hyundai Accent Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)