Maintenance
G2010007BEN
These grades are molded on the Temperature -A, B & C
7.
Uniform tire quality grading
side-walls of passenger vehicle tires. The temperature grades are A (the
Quality grades can be found where The tires available as standard or highest), B, and C, representing the
applicable on the tire sidewall optional equipment on your vehicle tire’s resistance to the generation of
between tread shoulder and maxi- may vary with respect to grade.
mum section width.
heat and its ability to dissipate heat
when tested under controlled condi-
tions on a specified indoor laboratory
test wheel.
For example:
Traction - AA, A, B & C
The traction grades, from highest to
TREAD wear 200
TRACTION AA
TEMPERATUE A
lowest, are AA, A, B and C. Those Sustained high temperature can
grades represent the tire’s ability to cause the material of the tire to
stop on wet pavement as measured degenerate and reduce tire life, and
under controlled conditions on spec- excessive temperature can lead to
ified government test surfaces of
sudden tire failure. Grades B and A
represent higher levels of perform-
ance on the laboratory test wheel
than the minimum required by law.
Tread wear
The tread wear grade is a compara- asphalt and concrete. A tire marked
tive rating based on the wear rate of C may have poor traction perform-
the tire when tested under controlled
conditions on a specified govern-
ment test course. For example, a tire
graded 150 would wear one-and-a-
half times (1½) as well on the gov-
ernment course as a tire graded 100.
The relative performance of tires
depends upon the actual conditions
of their use, however, and may
depart significantly from the norm
due to variations in driving habits,
service practices and differences in
road characteristics and climate.
ance.
WARNING - Tire
WARNING
temperature
The traction grade assigned to
this tire is based on straight-
ahead braking traction tests,
and does not include accelera-
tion, cornering, hydroplaning,
or peak traction characteristics.
The temperature grade for this
tire is established for a tire that
is properly inflated and not
overloaded. Excessive speed,
underinflation, or
excessive
loading, either separately or in
combination, can cause heat
build-up and possible sudden
tire failure. This can cause loss
of vehicle control and serious
injury or death.
7
50
| Categories | Hyundai Manuals, Hyundai H-1 Grand Starex Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand Starex |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)