2013 Hyundai Accent Owners Manual

Safety features of your vehicle
Type B
WARNING
As a  reminder to  the driver,  the driver’s
seat belt warning lights  will illuminate for
approximately 6  seconds each time  you
turn the ignition  switch ON regardless of
belt fastening.
If  the  driver’s seat  belt  is  not  fastened
when the ignition  switch is turned ON  or
if  it   is  disconnected  after   the  ignition
switch is  turned ON, the  seat belt warn-
ing light will illuminate until the belt is fas-
tened.
If you continue not to fasten the seat belt
and you drive  over 9 km/h, the illuminat-
ed warning light will start to blink until you
drive under 6 km/h.
If you continue not to fasten the seat belt
and you drive over 20 km/h (12 mph) the
seat  belt  warning  chime will  sound  for
approximately 100 seconds  and the cor-
responding warning light will blink.
No   modifications   or   additions
should   be   made   by  the   user
which will either prevent  the seat
belt adjusting devices from  oper-
ating to remove  slack, or prevent
the seat belt assembly from being
adjusted to remove slack.
When you fasten  the seat belt, be
careful not to latch the seat belt in
buckles of other seat. It's very dan-
gerous  and you  may not  be  pro-
tected by the seat belt properly.
Do not unfasten the seat belt and
do  not  fasten  and  unfasten  the
seat belt repeatedly while driving.
This could  result in  loss of  con-
trol,   and  an   accident   causing
death, serious injury,  or property
damage.
When   fastening   the  seat   belt,
make sure that the seat belt does
not  pass  over   objects  that  are
hard or can break easily.
1GQA2083
Seat belt warning (if equipped)
Type A
As a reminder to  the driver, the seat belt
warning light  will blink  for approximately
seconds each time you turn the ignition
switch ON regardless of belt fastening.
If the driver’s seat belt is unfastened after
the  ignition switch  is  ON,  the seat  belt
warning  light  blinks  again   for  approxi-
mately 6 seconds.
If  the  driver's seat  belt  is  not  fastened
when the ignition  switch is turned ON  or
if it is unfastened after the ignition  switch
is ON,  the  seat belt  warning  chime will
sound  for  approximately 6  seconds.  At
this time, if  the seat belt is  fastened, the
chime will stop at once. (if equipped)
6
Make sure there is  nothing in the
buckle. The seat  belt may not  be
fastened securely.
3
12
Product Specification
Categories Hyundai Manuals, Hyundai Accent Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 402 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Accent
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field