Driving your vehicle
Starting the engine
1.Make sure the parking brake is
applied.
2. Place the transaxle shift lever in P
(Park). Depress the brake pedal fully.
You can also start the engine when the
shift lever is in the N (Neutral) position.
CAUTION
If the engine stalls while you are in
motion, do not attempt to move the
shift lever to the P (Park) position. If
traffic and road conditions permit,
you may put the shift lever in the N
(Neutral) position while the vehicle
is still moving and turn the ignition
switch to the START position in an
attempt to restart the engine.
WARNING
•
Always wear appropriate shoes
when operating your vehicle.
Unsuitable shoes (high heels, ski
boots,etc.) may interfere with
your ability to use the brake and
accelerator pedal.
3.
Turn the ignition switch to START and
hold it there until the engine starts (a
maximum of 10 seconds), then release
the key.
•
•
Do not start the vehicle with the
accelerator pedal depressed. The
vehicle can move and lead to an
accident.
Wait until the engine rpm is nor-
mal. The vehicle may suddenly
It should be started without depressing
the accelerator.
4.
Do not wait for the engine to warm up
while the vehicle remains stationary.
CAUTION
Do not engage the starter for
more than 10 seconds. If the
engine stalls or fails to start, wait
to 10 seconds before re-engag-
ing the starter. Improper use of
the starter may damage it.
Do not turn the ignition switch to
the START position with the
engine running. It may damage
the starter.
•
•
Start
driving at moderate engine
speeds. (Steep accelerating and decel-
erating should be avoided.)
move
if the brake pedal is
released when the rpm is high.
5
5
6
| Categories | Hyundai Manuals, Hyundai Azera Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Azera |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)