2014 Hyundai I30 Owners Manual

Maintenance
EMISSION CONTROL SYSTEM
G270000AFD-EA
Caution    for    the   Inspection     and
Maintenance   Test  (With   Electronic     2. Evaporative emission control
Stability Program (ESP) system)
System
G270200AFD-EA
The  emission   control  system   of  your
vehicle  is  covered  by  a  written  limited
warranty. Please see the warranty infor-
mation contained in the Service Passport
in your vehicle.
Your  vehicle  is  equipped  with  an  emis-
sion control system to meet all Australian
Design Rules (ADR) requirements.
•  To  prevent  the  vehicle  from  misfir-
ing  during   dynamometer  testing,
Stability
The    Evaporative    Emission    Control
System   is  designed   to   prevent   fuel
vapours  from  escaping  into  the  atmos-
phere.
turn
the
Electronic
Program (ESP) system off by press-
ing the ESP switch.
•  After dynamometer testing is com-
pleted, turn the ESP system back on
by pressing the ESP switch again.
G270201AUN-EA
Canister
There  are  three  emission  control  sys-
tems which are as follows.
Fuel  vapours  generated  inside  the  fuel
tank  are   absorbed  and  stored   in  the
onboard  canister.  When  the  engine  is
running, the fuel vapours absorbed in the
canister  are  drawn  into  the  surge  tank
through the purge control solenoid valve.
(1) Crankcase emission control system
(2) Evaporative emission control system
(3) Exhaust emission control system
G270100AUN
1. Crankcase emission control
system
The  positive  crankcase  ventilation  sys-
tem is employed to prevent air pollution
caused by blow-by gases being emitted
from the crankcase.This system supplies
fresh filtered air to the crankcase through
the air intake hose. Inside the crankcase,
the fresh air mixes with blow-by gases,
which then pass through the PCV valve
into the induction system.
In order to assure the proper function of
the  emission  control  systems,  it  is  rec-
ommended   that   you  have   your   car
inspected  and maintained by an autho-
rised  HYUNDAI   dealer  in  accordance
with  the  maintenance  schedule  in  this
manual.
G270202AUN
Purge Control Solenoid Valve (PCSV)
The purge control solenoid valve is con-
trolled  by   the  Engine  Control   Module
(ECM); when the engine coolant temper-
ature is low during idling, the PCSV clos-
es  so  that  evaporated  fuel  is  not  taken
into the engine. After the engine warms-
up  during  ordinary   driving,  the  PCSV
opens to introduce evaporated fuel to the
engine.
7
74
Product Specification
Categories Hyundai Manuals, Hyundai i30 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 368 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i30
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field