What to do in an emergency
Using the Tire Mobility Kit
CAUTION - Tire pressure
Do not attempt to drive your
vehicle if the tire pressure is
1.
Detach the speed restriction label
(0) from the sealant bottle (1), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
below 200kpa (29 PSI).
This
could result in an accident due
to sudden tire failure.
2.
3.
4.
Screw connection hose (9) onto
the connector of the sealant bottle.
Ensure that screw cap (8) is
closed.
Unscrew the valve cap from the
valve of the defective wheel and
screw filling hose (2) of the sealant
bottle onto the valve.
Insert the sealant bottle into the
housing (4) of the compressor so
that the bottle is upright.
9.
10.
Switch off the compressor.
Detach the hoses from the
sealant bottle connector and
from the tire valve.
OYN069018
6.
7.
8.
Ensure that the compressor is
switched off, position 0.
Plug the compressor power cord
into the vehicle power outlet.
Return the Tire Mobility Kit to its stor-
age location in the vehicle.
5.
With the engine start/stop button
position on or ignition switch posi-
tion on, switch on the compressor
and let it run for approximately 5~7
minutes to fill the sealant up to
proper pressure (refer to the Tire
and Wheels, chapter 8). The infla-
tion pressure of the tire after filling
WARNING - Carbon
monoxide
Do not leave your vehicle run-
ning in a poorly ventilated area
for extended periods of time.
monoxide poisoning
and suffocation can occur.
Carbon
is
unimportant
and
will
be
checked/corrected later.
Be careful not to overinflate the
tire and stay away from the tire
when filling it.
6
28
| Categories | Hyundai Manuals, Hyundai Accent Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)