FEATURES AND CONTROLS
HOMELINK WIRELESS CONTROL SYSTEM
Smart Trunk
Trunk will open automatically when
detecting smart key within range near the
trunk for more than 3 seconds.
To enable Smart Trunk function:
Vehicle must be in P (Park) to adjust
settings in the User Setting mode.
Standard Programming
1.
Select "Door/Trunk" in the User Settings
in the instrument cluster.
To program most devices, follow these instructions:
1.
For first-time programming, press and hold the two outside buttons,
HomeLink® Channel 1 and Channel 3 Buttons, until the indicator light
2.
Check "Smart Trunk".
NOTE:
begins to flash (after 10 seconds). Release both buttons. Do not hold
the buttons for longer than 20 seconds.
Function is active after 15 seconds when all
doors are closed and locked. The vehicle will
also provide an audible and visual alarm while
activating. For more details, refer to Owner's
Manual.
2. Position the end of your hand-held transmitter 1-3 inches (2-8 cm)
away from the HomeLink® buttons while keeping the indicator light
in view.
3.
4.
Simultaneously press and hold both the HomeLink® and hand-held
transmitter button. DO NOT release the buttons until step 4 has
been completed.
While continuing to hold the buttons the red indicator Status LED
will flash slowly and then rapidly after HomeLink® successfully trains
CHILD-PROTECTOR REAR DOOR LOCK
to the frequency signal from the hand-held transmitter. Release both
buttons.
For detail instructions, refer to your Owner’s Manual or visit
www.homelink.com.
Lock
Insert a screwdriver into the hole and
turn it to the lock position.
Unlock
Insert a screwdriver into the hole and turn it
counterclockwise to unlock position.
12IQuickReferenceGuide
Quick Reference Guide I 13
HYUNDAI
GENESIS
Categories | Hyundai Manuals, Hyundai Genesis Coupe Manuals |
---|---|
Download File |
|
Document Type | Quick Reference Guide |
Language | English |
Product Brand | Hyundai, Genesis Coupe |
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)