What to do in an emergency
ROAD WARNING
IN CASE OF AN EMERGENCY
WHILE DRIVING
It should be used whenever emergency
repairs are being made or when the vehi- If the engine stalls at a crossroad
cle is stopped near the edge of a road-
way.
or crossing
•
If the engine stalls at a crossroad or
crossing, set the shift lever in the N
(Neutral) position and then push the
vehicle to a safe place.
To turn the hazard warning flasher on or
off, press the hazard warning flasher but-
ton with the ignition switch in any posi-
tion. The button is located in the center
console switch panel. All turn signal
lights will flash simultaneously.
•
If your vehicle has a manual transaxle
not equipped with a ignition lock
switch, the vehicle can move forward
by shifting to the 2(second) or 3(third)
gear and then turning the starter with-
out depressing the clutch pedal.
•
The hazard warning flasher operates
whether your vehicle is running or not.
OBA043027L
Hazard warning flasher
• The turn signals do not work when the
hazard flasher is on.
The hazard warning flasher serves as a
warning to other drivers to exercise
extreme caution when approaching,
overtaking, or passing your vehicle.
If you have a flat tire while driving
If a tire goes flat while you are driving:
1.
Take your foot off the accelerator pedal
and let the vehicle slow down while
driving straight ahead. Do not apply the
brakes immediately or attempt to pull
off the road as this may cause a loss of
control. When the vehicle has slowed
to such a speed that it is safe to do so,
brake carefully and pull off the road.
Drive off the road as far as possible
and park on a firm level ground. If you
are on a divided highway, do not park
in the median area between the two
traffic lanes.
6
2
| Categories | Hyundai Manuals, Hyundai Grand i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Grand i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)