Starting and stopping the engine
for turbocharger intercooler
NOTICE
NOTICE
To prevent damage to the vehicle: To prevent damage to the vehicle:
1.Do
not race or accelerate the
•
If the engine stalls while you are When the stop lamp fuse is blown,
in motion, do not attempt to you can't start the engine normal-
move the shift lever to the P ly. Replace the fuse with a new
engine immediately after starting
the engine.
If the engine is cold, idle for sever-
al seconds before sufficient lubri-
cation is ensured in the turbo
charger unit.
(Park) position.
one. If you are not able to replace
the fuse, you can start the engine
by pressing and holding the
Engine Start/Stop button for 10
seconds
Start/Stop button in the ACC posi-
tion.
If traffic and road conditions
permit, you may put the shift
lever in the N (Neutral) position
while the vehicle is still moving
and press the Engine Start/Stop
button in an attempt to restart
the engine.
2.After
high speed or extended driv-
ing that requires heavy engine
load, idle the engine about one
minute before turning the engine
off. This idle time will allow the tur-
bocharger to cool prior to shutting
the engine off.
with
the
Engine
Do
not
press
the
Engine
5
Start/Stop button for more than 10
seconds except when the stop
lamp fuse is blown.
•
Do not push or tow your vehicle
to start the engine.
For your safety always depress
the brake and/or clutch pedal
before starting the engine.
NOTICE
Do not turn off the engine immedi-
ately after it has been subjected to
a heavy load. Doing so may cause
severe damage to the engine or
turbo charger unit.
5-17
| Categories | Hyundai Manuals, Hyundai i20 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i20 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)