Driving your vehicle
Operating conditions
Warning type
❈ If your vehicle's left or right side
bumper is blinded by barrier or
vehicles, the system sensing ability
may be deteriorated.
•
•
•
When the ignition is ON, if you
press the BSD switch, the switch
indicator illuminates and the system
turns on.
The system operates when the
vehicle speed is below 10 km/h
WARNING
•
The warning light on the out-
side rearview mirror housing
will illuminate whenever a
vehicle is detected at the rear
side by the system.
(6.2
mph) with the shift lever in R
(Rear) gear.
The RCTA (Rear Cross Traffic Alert)
detecting range is 0.5m ~ 20m
based on the side direction. If the
approaching vehicle speed is
To avoid accidents, do not
focus only on the warning
light and neglect to see the
surroundings of the vehicle.
• Drive safely even though the
vehicle is equipped with a
BSD (Blind Spot Detection)
system. Do not solely rely on
the system but check for your-
self before changing lanes.
OVI053132
4
km/h (2.5 mph) ~ 36 km/h (22 mph)
•
•
If the vehicle detected by sensors
approaches your vehicle, the warn-
ing chime will sound and the warn-
ing light will blink on the outside
rearview mirror.
If the detected vehicle is out of the
sensing range from behind your
vehicle, moves in the opposite
direction away from your vehicle or
moves slowly, the warning is can-
celled.
within sensing range, it is detected.
However, the system sensing
range is different base on condi-
tions. Always pay attention to the
surroundings.
The system may not alert the
driver in some conditions so
always check the surround-
ings while driving.
•
The system may not operate prop-
erly due to other factors or circum-
stances. Always pay attention to
your surroundings.
5
53
| Categories | Hyundai Manuals, Hyundai Santa Fe Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Santa Fe |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)