Features of your vehicle
■
Type B
■ Type C
OMD040019
OMD040018
OUN026013
Type B - Auto down window (if equipped)
Type C - Auto up/down window
(if equipped)
Automatic reversal (if equipped)
Pressing
the
power
window
switch
If the upward movement of the window is
blocked by an object or part of the body,
the window will detect the resistance and
will stop upward movement. The window
will then lower approximately 30 cm (11.8
in.) to allow the object to be cleared.
If the window detects the resistance
while the power window switch is pulled
up continuously, the window will stop
upward movement then lower approxi-
mately 2.5 cm (1 in.). And if the power
window switch is pulled up continuously
again within 5 seconds after the window
is lowered by the automatic window
reversal feature, the automatic window
reversal will not operate.
momentarily to the second detent posi-
tion (6) completely lowers the window
even when the switch is released.To stop
the window at the desired position while
the window is in operation, pull up the
switch momentarily to the opposite direc-
tion of the window movement.
Pressing or pulling up the power window
switch momentarily to the second detent
position (6) completely lowers or lifts the
window
even when the switch is
released. To stop the window at the
desired position while the window is in
operation, pull up or press down and
release the switch.
If the power window does not operate
normally, the automatic power window
system must be reset as follows:
1.
Turn the ignition switch to the ON posi-
tion.
2.
Close the window and continue pulling
up the power window switch for at
least 1 second after the window is
completely closed.
4
28
| Categories | Hyundai Manuals, Hyundai i30 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i30 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)