2004 Hyundai H 1 Owners Manual

DO-IT YOURSELF MAINTENANCE
8
CHANGING THE AIR
CONDITIONER FILTER
15
G140D01HP-GAT
Checking the Compressor Drive
Belt
When  the  air  conditioning  is  being
used regularly, the  compressor drive
belt  tension  should  be   checked  at
least once  a month.
B140E01P-AAT
(ForEvaporatorandBlowerUnit)
(If installed)
Gasoline
The air conditioner  filter is located in
the air  intake  duct behind  the wind-
shield washer reservoir.
It  helps to  decrease pollutants  from
entering the  car.
To check the drive belt tension, press
down on the belt halfway between the
engine  crankshaft   and  compressor
pulleys. Pressing with your finger, you
should not be able to deflect  this belt
anymore  than 8.0  mm.  If  you have
the  instruments  to  check   it  with  a
force  of 98N  (22  lb.), the  deflection
should be approx. 8.0 mm (0.315 in.).
If  the belt  is  too  loose,  have it  ad-
justed by your  Hyundai dealer.
Auto
tensioner
pulley
COMP. pulley
1.
Open the engine  hood.
Generator
pulley
Engine pulley
HSM396-1
Diesel (2.5  TCI)
Diesel (2.5  CRDi)
NOTE:
The compressor drive belt tension
for diesel engine (2.5 CRDi only) is
adjusted  automatically.
Tension
pulley
COMP. pulley
B140E01P
Crankshaft
pulley
Auto
tensioner
Crankshaft
pulley
COMP.
pulley
G190D01P
Product Specification
Categories Hyundai Manuals, Hyundai H-1 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 273 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Hyundai H-1
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field