2004 Hyundai H 1 Owners Manual

BEFORE DRIVING YOUR VEHICLE
1
39
To adjust  the height of  seat belt  an-
chor, lower or raise the height adjuster
into an appropriate position.  To raise
the height adjuster, pull it up. To lower
it,  push  it  down while  pressing  the
height adjuster button.
B180A02A-GAT
Driver'sandPassenger's3-Point
System  with   Webbing  Clamp
Locking Retractor (If installed)
ever, the belt will lock into  position. It
will also lock if you try to lean forward
too quickly.
To Fasten Your Belt
Release the button to lock the anchor
into position.  Try  sliding the  release
button to make sure that it has locked
into the position.
B180A01A-GAT
Driver'sandPassenger's3-Point
System with Emergency
Locking Retractor (If installed)
To Fasten Your Belt
!
WARNING:
o  The height  adjuster  must be  in
thelockedpositionwheneverthe
vehicle is moving.
B180A01L
o  The misadjustment  of height of
the  shoulder belt  could  reduce
the effectiveness of the seat belt
in a crash.
To fasten your seat belt,  pull it out of
the retractor and insert  the metal tab
into the  buckle. There will  be an au-
dible "click" when the tab locks into the
buckle.
B180A01L
The seat belt automatically adjusts to
the proper length only after the lap belt
is  adjusted  manually  so  that  it  fits
snugly around  your hips. If  you lean
forwardinaslow,easymotion,thebelt
will extend and let you move around. If
there is a sudden stop or impact, how-
To fasten your seat belt,  pull it out of
the retractor and insert  the metal tab
into the  buckle. There will  be an au-
dible "click" when the tab locks into the
buckle.
Product Specification
Categories Hyundai Manuals, Hyundai H-1 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 273 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, Hyundai H-1
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field