5
VEHICLE MAINTENANCE REQUIREMENTS
8
Inspect the hose routing to assure that
the hoses do not come in contact with
any heat source, sharp edges or mov-
ing component which might cause heat
damage or mechanical wear. Inspect
all hose connections, such as clamps
and couplings, to make sure they are
secure, and that no leaks are present.
Hoses should be replaced immedi-
ately if there is any evidence of dete-
rioration or damage.
F060N02E-AAT
o Valve Clearance
F070E04A-AAT
o Automatic Transaxle Fluid
Inspect excessive valve noise and/or
engine vibration and adjust if neces-
sary. A qualified technician should
perform the operation.
The fluid level should be in the "HOT"
range of the dipstick, after the engine
and transaxle are at normal operating
temperature. Check the automatic
transaxle fluid level with the engine
running and the transaxle in neutral,
with the parking brake properly ap-
plied.
Use HYUNDAI GENUINE ATF SP III,
DIAMOND ATF SP III, SK ATF SP III
or other brands approved by Hyundai
Motor Co., when adding or changing
fluid.
F070B01A-GAT
o Cooling System
Check the cooling system part, such
as radiator, coolant reservoir, hoses
and connections for leakage and dam-
age. Replace any damaged parts.
F060H01A-AAT
o Air Cleaner Filter
A Genuine Hyundai air cleaner filter is
recommended when filter is replaced.
F070F01A-AAT
o Brake Hoses and Lines
F060J01A-AAT
o Spark Plugs
F070C01A-AAT
o Coolant
Visually check for proper installation,
chafing, cracks, deterioration and any
leakage. Replace any deteriorated or
damaged parts immediately.
Make sure to install new spark plugs
of the correct heat range.
The coolant should be changed at
the intervals specified in the mainte-
nance schedule.
| Categories | Hyundai Manuals, Hyundai Azera Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Azera |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)