6
DO-IT-YOURSELF MAINTENANCE
8
G050B01A-AAT
Recommended Engine Coolant
The coolant level can be seen on the
side of the plastic coolant reservoir.
The level of the coolant should be
between the "L" and "F" lines on the
reservoir when the engine is warm
with it at idle . If the level is below the
"L" mark, add engine coolant to bring
it up to "F". If the level is low, inspect
for coolant leaks and recheck the
fluid level frequently. If the level drops
again, visit your Hyundai dealer for an
inspection and diagnosis of the rea-
son.
Ambient
Engine Coolant concentration
temperature
Antifreeze
Water
solution
Use a high quality ethylene-glycol
coolant in a 50/50 mix with water. The
engine coolant should be compatible
with aluminum engine parts. Addi-
tional corrosion inhibitors or additives
should not be used. The cooling sys-
tem must be maintained with the cor-
rect concentration and type of engine
coolant to prevent freezing and corro-
sion.
°C (
-15
°F)
(5)
35%
40%
50%
60%
65%
60%
50%
40%
-25
(-13)
(-31)
-35
-45 (-49)
G050C01TG-GAT
To Check the Coolant Level
!
!
CAUTION:
CAUTION:
Never allow the concentration of
antifreeze to exceed the 60% level
or go below the 35% level, or dam-
age to the cooling system may
result.
o Engine coolant can damage the
finish of your car. If you spill
engine coolant on the car, wash it
off thoroughly with clean water.
o The engine in your vehicle has
aluminum engine parts and must
be protected by an ethylene-gly-
col base coolant to prevent corro-
sion and freezing.
For proper concentration when adding
or replacing the engine coolant, refer
to the following table.
G050C01TG
And, do not use the hard water.
The hard water can cause engine
damage from corrosion, overheat-
ing or freezing.
| Categories | Hyundai Manuals, Hyundai Azera Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Azera |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)