Getting started
Inserting mobile phone
Logging on mobile phone in
vehicle
If you insert or remove the mobile phone during
a call, the call may be interrupted depending on
the mobile phone model.
To log your mobile phone onto the vehicle, you
need a special Bluetooth passkey. This is
included in the information kit.
1.
2.
Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
The following prerequisites must be met:
>
>
>
The ignition is switched on.
The mobile phone is ready for operation.
Push the mobile phone downward toward
the electrical connections, arrow 1, and
press forward, arrow 2, until it engages.
The Bluetooth connections in the vehicle
and the mobile phone are activated.
>
Depending on the mobile phone model,
certain presets are required on the mobile
phone, e.g. detecting, connecting or cou-
pling Bluetooth unit, refer to the operating
instructions of your mobile phone.
Only log on the mobile phone with the
vehicle stopped; otherwise, the passen-
gers and other road user can be endangered
due to a lack of attentiveness on the part of the
driver.<
The battery is charged starting from radio ready
state of the vehicle, refer to charge indicator on
mobile phone.
Preparation with iDrive
iDrive, for principle details, refer to page 16.
1.
Press the
menu.
button to open the start
Removing mobile phone
2.
3.
4.
Move the controller toward "Settings".
Select "Phone" and press the controller.
To remove mobile phone, depending on model:
>
>
Press the button.
Select "PAIRING" and press the controller.
The three LEDs in the status line flash, refer
to page 20.
Push the button upward.
179
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG
| Categories | BMW 7-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 750i, BMW 750Li, BMW 760Li, BMW E65, BMW E66 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)