164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 319
Version: 2.11.8.1
Replacing bulbs
319
License plate lamps
Correct headlamp adjustment is extremely
important. High beam adjustments
simultaneously aim the low beam. To check
and readjust a headlamp, follow the steps
described:
X Park the vehicle on a level surface 25 feet
(7.6
m) from a vertical test screen or wall.
X Make sure the vehicle has a normal tailgate
load.
X Switch on the low beam headlampsL.
If the beam does not show a beam pattern as
indicated in the figure left, then follow the
steps below:
X Loosen screws: of lamp cover to be
removed.
X Remove lamp cover;.
X Open the hood (Y page 214).
X Replace the bulb.
X Reinstall lamp cover;.
X Retighten screws:.
Adjusting headlamp aim
The adjustment screws are located under the
cover panel.
X Insert a suitable tool into the openings in
the panel cover. The direction of arrows
=
and? indicate the angle in which the
tool has to be inserted in oder to access the
adjustment screws.
X Always turn the adjustment screws equally
for vertical adjustment until the headlamp
is adjusted as shown in:. Turn clockwise
for upward movement and
: V Vertical centerline
; H Horizontal mounting height, measured
from the center
counterclockwise for downward
movement.
Graduations:
RScrew at arrow=: 0.67° pitch
RScrew at arrow?: 0.50° pitch
The left and right headlamps must be
adjusted individually.
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)