164_AKB;
d2ureepe,
6; 2, en-US
2009-03-25T14:36:45+01:00 - Seite 335
Version: 2.11.8.1
AdBlue® (diesel engine only)
335
!
Make sure to tighten the AdBlue® refill
container only moderately, i.e. hand-tight,
as you could otherwise damage it.
X Push AdBlue® refill container= down.
The AdBlue® tank is filled. This may take up
to 1 minute.
i When you stop pushing the AdBlue® refill
container down, the filling process is
stopped and you can remove the refill
container.
X Turn AdBlue® filler cap cover:
counterclockwise and remove it.
X Release AdBlue® refill container=.
X Turn AdBlue® refill container=
counterclockwise and remove it.
X Place AdBlue® filler cap; (Y page 334) on
filler neck and turn it clockwise.
X Turn AdBlue® filler cap;
counterclockwise and open it.
Filler cap; is tethered with a plastic strap.
X Place AdBlue® filler cap cover: as
illustrated and turn it clockwise to its stop.
X Lower cargo compartment floor.
X Close the tailgate.
X Drive the vehicle at a speed of at least
10
mph (16 km/h).
The messageCheck Additive See
Operator’s Manual disappears after
approximately 1 minute.
X Pull dust cap off of AdBlue® refill container i If the messageCheck Additive See
=
.
Operator’s Manual still appears in the
X Place AdBlue® refill container= on the
filler neck as illustrated and tighten it
moderately (hand-tight) by turning it
clockwise.
multifunction display, refill with one more
container of AdBlue®.
Z
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML350, Mercedes-Benz ML350 BlueTec, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)