Wheel changing
Do not attempt to raise the vehicle
3. After raising the vehicle on the jack,
remove the locking wheel nut.
unless the jack head is fully engaged
in the jacking point. Only jack the
vehicle using the approved jacking
points.
Note: After use store the wheel nut adapter
correctly in the tool kit.
Take care when loosening the wheel
nuts. The wheel brace may slip off if
not properly attached and the wheel
nuts may give way suddenly. Either
unexpected movement, may cause an
injury.
WHEEL CHANGING
WARNING - THAT NO PERSON
SHOULD PLACE ANY PORTION OF
THEIR BODY UNDER A VEHICLE THAT
IS SUPPORTED BY A JACK.
Position the jack from the side of the
vehicle, in line with the appropriate
jacking point.
Take care when lifting the spare wheel
and removing the punctured wheel.
The wheels are heavy and can cause
injuries if not handled correctly.
Jack up the vehicle using only the
jacking points described, or damage to
the vehicle could occur.
Do not start or run the engine while the
vehicle is supported only by a jack.
Note: Your vehicle may be fitted with a tilt
sensor which activates the alarm if the vehicle
is tilted in any direction after it has been locked.
To lock the doors while changing the wheel,
and avoid the alarm activating, tilt sensor can
be temporarily disabled. See 56, VEHICLE
INFORMATION AND SETTINGS MENU.
LOCKING WHEEL NUTS
Locking wheel nuts can be removed only by
using the special adapter provided in the tool
kit.
Note: When the vehicle is first supplied, the
adapter may be stored in the glove
Before rasing the vehicle, use the wheel nut
brace to slacken the wheel nuts half a turn
counter clockwise.
compartment. It should be removed and stored
in the tool kit as soon as possible.
Note: A code number is stamped onto the
underside of the adapter. If a replacement
adapter is required, you will be asked to quote
this number. Ensure that the number is
recorded and kept safe, but should not be kept
with the vehicle.
RELEASING LOCKING WHEEL NUTS
1.
Insert the wheel nut adapter into the
locking wheel nut, ensuring that it is fully
engaged.
2.
Locate the wheel brace over the adapter
and unscrew the wheel nut half a turn
counter clockwise.
210
| Categories | Land Rover, Land Rover Evoque |
|---|---|
| Tags | Land Rover |
| Model Year | 2011 |
| Download File |
|
| Language | Bulgarian, English |
| Product Name | Evoque Handbook |
| Product Brand | Land Rover |
| Applicable to Country | Bulgaria, International |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)