Wheels
We recommend that you break in new
tires for approx. 60 miles (100 km) at
moderate speed. It is imperative that the
wheel mounting bolts be retightened
after approx. 60-300 miles (100-500
km).
Rotating Wheels
Replace rims or tires with the same
designation, manufacturer and type as
shown on the original part. See your
authorized Mercedes-Benz dealer for
further information.
The wheels can be rotated according to
the degree of tire wear while retaining
the same direction of travel.
Rotating, however, should be carried
out at a mileage of 3000 -6000 miles
(5000 - 10 000 km), before the
characteristic tire wear pattern
(shoulder wear on front wheels and
tread center wear on rear wheels)
becomes visible, as otherwise the
driving properties deteriorate.
On new vehicles retightening is carried
out during the 1st inspection.
Retightening is also necessary
whenever wheels are fitted, e.g. when
the spare wheel is used for the first
time or when a set of wheels with M +
S tires is installed.
Warning!
Do not mix different tire construction
types (i.e. radial, bias, and bias-belted)
on your car because handling may be
adversely affected and may result in
loss of control.
Tightening torque: 110 ft.lb. (150 Nm).
For rim and tire specifications, refer to
"Technical Data".
Note:
See your authorized Mercedes-Benz
dealer for information on tested and
recommended rims and tires for
summer and winter operation. They
can also offer advice concerning tire
service and purchase.
Thoroughly clean the inner side of
the wheels any time you rotate the
wheels or wash the vehicle underside.
The use of retread tires is not
recommended. Retread tires may
adversely affect the handling
characteristics and safety of the
vehicle.
Warning!
Worn, old tires can cause accidents.
If the tire tread is badly worn, or if
the tires have sustained damage,
replace them.
Tire Replacement
Front tires should be replaced in sets.
Furthermore - in the event of tire
replacement - the spare wheel, if
possible, should be used on the rear
axle. Rims and tires must be of the
same size and type. For dimensions,
see "Technical Data".
When replacing rims, use only
genuine Mercedes-Benz wheel bolts
(identified by Mercedes star)
specified for the particular rim type.
Failure to do so can result in the bolts
loosening and possibly an accident.
Dented or bent rims can cause tire
pressure loss and damage to the tire
beads. For this reason, check rims for
damage at regular intervals.
94
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz 600SEL, Mercedes-Benz W140 |
| Model Year | 1992 |
| Download File |
|
| Document File Type | |
| Publisher | mbusa.com |
| Wikipedia's Page | Mercedes-Benz W140 |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4.5 out of 5)
Automotive readers have rated 1992 Mercedes-Benz 600SEL W140 Owners Manual 4.5 out of 5.0 based on 2 product reviews. Was virtually impossible to get to next screen. Need to make it easier to use.
good source for info.