Drilling the Center Console Box
24. Turn around the center console box, and position
template B against the rear of the center console
box. Align the holes in the template with the holes in
the center console box.
19.
Position template A into the center console box with
the arrow on the template facing forward. Using a
felt-tip pen, mark the center console box through the
two holes in the template. Center-punch each mark.
FRONT
TEMPLATE A
FELT-TIP
PEN
FELT-TIP
PEN
CENTER
CONSOLE BOX
6
mm
DRILL BIT
Align the
TEMPLATE B
holes.
25.
26.
Using a felt-tip pen, mark the back of the center
console box through the four holes in the template.
Center-punch each mark.
CENTER
CONSOLE BOX
ARROW
FRONT
While wearing eye protection, drill four 20 mm holes
through the marks using a holesaw.
20.
21.
While wearing eye protection, drill two 6 mm holes
through the marks.
FRONT
Flip over the center console box, and position
template C against the front of the center console
box. Align the holes in template C with the holes in
the center console box.
CENTER
CONSOLE
BOX
35 mm
HOLESAW
20
mm
HOLESAW
CENTER
CONSOLE BOX
HOLESAW
HOLE
FELT-TIP
PEN
CUTTING
AREA
FELT-TIP PEN
(Draw a line
Align the
holes.
TEMPLATE C
around the holes.)
22.
23.
Using a felt-tip pen, mark the front of the center
console box through the hole in the template.
Center-punch the mark.
Cut and remove this section.
27.
Using a felt-tip pen, draw a line around the four holes
you drilled. Using a utility knife or a hacksaw blade,
carefully cut out the area between the holes.
While wearing eye protection, drill a 35 mm hole
through the mark using a holesaw.
6
of 10
AII 19998 (9809)
1998 American Honda Motor Co., Inc - All Rights Reserved.
Categories | Car Audio and Video, Honda Accord Manuals, Honda Manuals |
---|---|
Document Type | Free Auto PDF Instruction Manual Download |
Model Year | 1999 |
Download File |
|
Document File Type | |
Publisher | automobiles.honda.com |
Wikipedia's Page | Honda Accord |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)