33.
Plug in the radio 20-pin connector, the antenna lead,
and the bus cable:
35. Carefully unpack the CD changer. Remove the three
shipping screws, and discard the shipping cover.
Install an adhesive seal (included with the CD
changer kit) over each of the three screw holes.
Save the shipping screws in the event the unit
needs to be serviced.
•
If the vehicle is not equipped with an optional
cassette player, plug the bus cable into the radio.
RADIO 20-PIN
CONNECTOR
BUS CABLE
SHIPPING
SCREW
14-PIN
CONNECTOR
ANTENNA
LEAD
SHIPPING
COVER
(Discard.)
ADHESIVE
SEAL
RADIO
BRACKET
RADIO
36.
Visually check the position of the spring adjusting
pin on both sides of the CD changer. If the spring
adjusting pins are not in the horizontal (H) position,
move the pins to the horizontal (H) position by
sliding them up with an awl.
RADIO
MOUNTING
BOLT
(reused)
SPRING
ADJUSTING PINS
LOCKING COVER
(Included with CD
changer kit)
•
If the vehicle is equipped with an optional
cassette player, plug the bus cable into the
cassette player.
CASSETTE
PLAYER
LOCKING COVER
(Included with CD
changer kit)
BUS
CABLE
(H : HORIZONTAL)
34.
Reinstall the radio, and the center console.
SPRING ADJUSTING PIN
(V : VERTICAL)
37.
Remove the adhesive backing from the “L” and “R”
locking covers, and attach them to the sides of the
CD changer. Align the diagonally opposite holes
with the H and V positions.
8
of 10
AII 19998 (9809)
1998 American Honda Motor Co., Inc - All Rights Reserved.
| Categories | Car Audio and Video, Honda Accord Manuals, Honda Manuals |
|---|---|
| Document Type | Free Auto PDF Instruction Manual Download |
| Model Year | 1999 |
| Download File |
|
| Document File Type | |
| Publisher | automobiles.honda.com |
| Wikipedia's Page | Honda Accord |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)