MANUALGEARBOX
DEFENDER
NOTE: If necessary, final adjustment can
be made in vehicle. To increase
load turn screw clockwise or
Bias spring adjustment
NOTE: The purpose of this adjustment is
to set both bolts so that the bias spring
legs apply equal pressure on both ends
of the gear lever cross pin when third or fourth
gear is engaged. This will ensure that when the
lever is in neutral, the gear change mechanism
is automatically aligned for third or fourth gear
selection.
anti -clockwise to reduce load.
Fifth gear stop screw adjustment.
1.
Adjust screw to protrude from housing the
distance across corners of locknut.
NOTE: This is only an approximate
setting which will limit travel of selector
yoke but will allow fifth gear to be
1. Select fourth gear and
the cross pins.
both spring legs over
selected.
2. Turn adjustment bolts until heads touch spring
legs.
3. Apply light pressure to gear lever to the right
and adjust left hand bolt.
/
------
L
A
NOTE: Clearance between spring leg and
bolt
(0.002 in.) using feeler
gauge.
4.
Move lever to left and adjust right hand bolt to
clearance.
5.
Tighten locknuts.
2.
Select fifth gear. While applying light pressure
to gear lever towards right, turn screw
clockwise until it contacts yoke. Turn screw half
a turn
clockwise and tighten nut.
| Categories | Land Rover, Land Rover Defender 110, Land Rover Defender 130, Land Rover Defender 90 |
|---|---|
| Tags | Land Rover |
| Model Year | 1999 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 90, 110, 130 |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)