Replacing bulb:
Bulb for Low Beam (Xenon)
Bulb for Fog Lamp H1 (55 W)
To prevent a possible electrical short
circuit, switch off lamp prior to
replacing a bulb.
Warning!
Open hood.
Because of high voltage in Xenon
lamps, it is dangerous to replace the
bulb or repair the lamp and its
components. We recommend that
you have such work done by a
qualified technician.
Depress latch (2) and remove
cover (1).
When replacing bulbs, install only 12
volt bulbs with the specified watt
rating.
Pull off electrical connector (9).
Unhook clamping ring and remove
bulb.
When replacing halogen bulbs do not
touch glass portion of bulb with bare
hands. Use plain paper or a clean cloth.
Bulb for High Beam (55 W)
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Depress latch (4) and remove cover (3).
Pull off electrical connector (10).
Unhook clamping ring and remove bulb.
Warning!
Halogen lamps contain pressurized
gas. A bulb can explode if you:
Reinstall bottom end of cover (1) and
push against top end of cover until
properly seated.
•
•
•
touch or move it when hot,
drop the bulb,
scratch the bulb.
Insert new bulb (seating properly in
cutouts of bulb socket), and mount
clamping ring. Reinstall and push
electrical connector on securely.
Check lamp for proper operation.
Wear eye and hand protection.
Reinstall bottom end of cover (3) and
push against top end of cover until
properly seated.
Check lamp for proper operation.
115
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz S600, Mercedes-Benz W140 |
| Model Year | 1999 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)