control light starts to flash, first slowly,
then rapidly. This means that the
integrated remote control has accepted
the frequency and code of the portable
transmitter.
4. Release and press the programmed
button on the rear view mirror once
again to turn off the training light in
the garage door opener.
Antenna
The antenna extends when switching
on the radio and/or telephone.
Note:
5
Confirm the garage door operation
by pressing the programmed button
on the interior rear view mirror.
4.
If you wish to reprogram or
program the remaining buttons,
repeat steps 1 and 3.
To retract the antenna (e.g. when
entering a car wash) both radio and
telephone must be switched off.
Operation of remote control:
Note:
1. Turn key in steering lock to
position 1 or 2.
Cellular Telephone
If the garage door opener is equipped
with the "rolling code feature", it needs
to be trained to accept the remote
control command.
The vehicle is prepared for the
installation of a cellular telephone. For
further information and installation
contact your authorized Mercedes-
Benz dealer.
2. Select and press the appropriate
button (1, 2 or 3) to
activate the remote controlled
device. The remote control
transmitter continues to send
the signal as long as the button
is pressed - up to 20 seconds.
Erasing the remote control
memory:
To do so, the assistance of a second
person is required.
Warning!
1.
2.
Locate training button (part of
the opener unit in the garage).
Press and hold training button
until training light next to the
button begins to flash (in two
seconds).
Now have the second person
press and hold the previously
programmed button on the
interior rear view mirror until the
training light on the garage door
opener is lit continuously (in two
seconds).
Some jurisdictions prohibit the
driver from using a cellular
telephone while driving a vehicle.
Whether or not prohibited by law,
for safety reasons, the driver should
not use the cellular telephone while
the vehicle is in motion. Stop the
vehicle in a safe location before
answering or placing a call.
1. Turn key in steering lock to
position 1 or 2.
3.
2. Simultaneousy holding down the
left and right side buttons for
approximately 20 seconds, or
until the control light blinks
rapidly, will erase the codes of
all three channels.
75
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Document Type | Free PDF Owner's Manual Download. |
Tags | Mercedes-Benz S600, Mercedes-Benz W140 |
Model Year | 1999 |
Download File |
|
Document File Type | |
Publisher | bayhas.com |
Wikipedia's Page | Mercedes-Benz S-Class |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)