DO-IT-YOURSELF MAINTENANCE 6- 15
G140D01A-AAT
B145A01A-GAT
Checking the Compressor Drive Belt
CHANGING THE AIR FILTER
(For Evaporator and Blower Unit)
(If Installed)
0.315
(8mm)
in.
A/C
The air filter is located in front of the evaporator
unit behind the glove box.
It helps to decrease pollutants from entering the
car and to filter the air.
TENSION PULLEY
CRANK PULLEY
HLC2097
2.
Remove the cable and the wiring from the
filter cover.
G140D01A
When the air conditioning is being used regular-
ly, the compressor drive belt tension should be
checked at least once a month with the engine
turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22 lb.
HLC2096
1.
Open the glove box and remove the adjust-
ing pins on both sides of the glove box.
(98N),
the deflection should be 0.315 inches
(approx. 8.0 mm). If the belt is too loose, have
it adjusted by your Hyundai dealer.
HLC2098
3.
Remove the filter cover by pushing the upper
end of the filter cover.
| Categories | Hyundai Accent Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Accent 1.6 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Hyundai Accent Owners Manual 5.0 out of 5.0 based on 1 product reviews. Just bought Accent. Downloaded manual in seconds. Great free service.