FEATURES OF YOUR HYUNDAI
1- 71
H240B03O-AAT
3. TREB (Treble Control) Knob
5. BAND Selector
1.
POWER ON-OFF Control Knob
Press to pop the knob out and turn to the left or
right for the desired treble tone.
Pressing the
button changes the AM, FM1
FM/AM
The radio unit may be operated when the igni-
and FM2 bands. The mode selected is dis-
played on LCD.
tion key is in the "ACC" or "ON" position.
Press
the knob to switch the power on. The LCD
shows the radio frequency in the radio mode or
the tape direction indicator in the tape mode. To
switch the power off, press the knob again.
FAD (Fader Control) Knob
6.
PRESET STATION SELECT Button
Pull the treble control knob further out.
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speaker
sound will be attenuated)
Six (6) stations for AM, FM and FM2 respective-
ly can be preset in the electronic memory circuit
on this unit.
VOLUME Control
When the control knob is turned clockwise, rear
speaker sound will be emphasized.
(Front speaker sound will be attenuated)
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.
HOW
TO PRESET STATIONS
Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then, by
simply pressing the band select button and/or
one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:
4.
TUNE (Manual) Select Button
2. BASS Control Knob
Press the ( ) side or ( ) side to increase or to
decrease the frequency. Press either button and
hold down to continuously scroll. Release but-
ton once the desired station is reached.
Press to pop the knob out and turn to the left or
right for the desired bass tone.
BAL (Balance Control) Knob
o
o
o
o
Press band selector to set the band for AM,
FM, and FM2.
Select the desired station to be stored by
seek or manual tuning.
Determine the preset station select button
you wish to use to access that station.
Press the station select button for more than
two seconds. A select button indicator will
show in the display indicating which select
button you have depressed. The frequency
display will flash after it has been stored into
the memory with a beep sound. You should
then release the button, and proceed to pro-
SEEK
Operation
Pull the bass control knob further out.Turn the
control knob clockwise to emphasize right
speaker sound. (Left speaker sound will be
attenuated)
When the control knob is turned counterclock-
wise, left speaker sound will be emphasized.
(Right speaker sound will be attenuated)
(Automatic Channel Selection)
Press the TUNE select button 0.5 sec or more.
Releasing it will automatically tune to the next
available station with a beep sound.
When the ( ) side is pressed longer than 0.5
second, releasing will automatically tune to the
next higher frequency and when the ( ) side is
pressed longer than 0.5 second, releasing will
automatically tune to the next lower frequency.
| Categories | Hyundai Accent Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Accent 1.6 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Accent |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Hyundai Accent Owners Manual 5.0 out of 5.0 based on 1 product reviews. Just bought Accent. Downloaded manual in seconds. Great free service.