WHAT TO DO IN AN EMERGENCY
D060H02A-AAT
D060I01E-AAT
7.
Re-install Wheel Nuts
8. Lower Vehicle and Tighten Nuts
STA3071H
WARNING:
D060H01E-A
D060I01E-A
Wheel and wheel covers may have sharp
edges. Handle them carefully to avoid pos-
sible severe injury.
To reinstall the wheel cover, hold it on the studs,
put the wheel nuts on the studs and tighten them
finger tight. The nuts should be installed with their
small diameter ends directed inward. Jiggle the
tire to be sure it is completely seated, then tighten
the nuts as much as possible with your fingers
again.
Lower the car to the ground by turning the wheel
nut wrench counterclockwise. Then position the
wrench as shown in the drawing and tighten the
wheel nuts. Be sure the socket is seated com-
pletely over the nut. Do not stand on the wrench
handle or use an extension pipe over the wrench
handle.
Go around the wheel tightening every other nut
until they are all tight. Then double-check each
nut for tightness. After changing wheels, have a
technician tighten the wheel nuts to their proper
torque as soon as possible.
Before putting the wheel into place, be sure
that there is nothing on the hub or wheel
(such as mud, tar, gravel, etc.) that interferes
with the wheel from fitting solidly against the
hub. If there is, remove it. If there is not good
contact on the mounting surface between the
wheel and hub, the wheel nuts could loosen
and cause the loss of a wheel. Loss of a wheel
may result in loss of control of the vehicle.
This may cause serious injury or death.
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
65-80
lb.ft (900-1,100 kg.cm)
3
- 6
Categories | Hyundai Elantra Manuals, Hyundai Manuals |
---|---|
Tags | Hyundai Elantra 2.0 |
Model Year | 2003 |
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Elantra |
Document File Type | |
Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 5) Automotive readers have rated 2003 Hyundai Elantra Owners Manual 4.0 out of 5.0 based on 3 product reviews.
it is wonderful manual thanks alot