FEATURES OF YOUR HYUNDAI
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts be in-
spected periodically for wear or damage of any
kind. Parts of the system that are damaged
should be replaced as soon as possible.
B170A04A-AAT
WARNING:
HEIGHT ADJUSTABLE FRONT SEAT
o
Theheightadjustermustbeinthelocked
position when the vehicle is moving.
Themisadjustmentofheightoftheshoul-
der belt could reduce the effectiveness
of the seat belt in a crash.
SHOULDER BELT (If Installed)
o
B160C01A-AAT
Keep Belts Clean and Dry
B180A01L-AAT
SEAT BELT-Driver's 3-Point System
with Emergency Locking Retractor:
To Fasten Your Belt
To fasten your seat belt, pull it out of the
retractorandinsertthemetaltabintothebuckle.
There will be an audible "click" when the tab
locks into the buckle.
Theseatbeltautomaticallyadjuststotheproper
length only after the lap belt portion is adjusted
manually so that it fits snugly around your hips.
If you lean forward in a slow, easy motion, the
belt will extend and let you move around. If
there is a sudden stop or impact, the belt will
lock into position. It will also lock if you try to
lean forward too quickly. Check to make sure
that the belt is properly locked and that the belt
is not twisted.
Seat belts should be kept clean and dry. If belts
become dirty, they can be cleaned by using a
mild soap solution and warm water. Bleach,
dye, strong detergents or abrasives should not
beusedbecausetheymaydamageandweaken
the fabric.
B170A01E
You can adjust the height of the shoulder belt
anchor to one of the 4 positions for maximum
comfort and safty.
If the height of the adjusting seat belt is too near
your neck, you will not be getting the most
effective protection. The shoulder portion
should be adjusted so that it lies across your
chest and midway over your shoulder nearest
the door and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an appro-
priate position. To raise the height adjuster, pull
itup.Tolowerit,pushitdownwhilepressingthe
height adjuster button.
Release the button to lock the anchor into
position. Try sliding the height adjuster to make
sure that it has locked into the position.
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident. This should be done
even if no damage is visible. Additional ques-
tions concerning seat belt operation should be
directed to your Hyundai Dealer.
NOTE:
If the driver's seat belt is not fastened when
the ignition key is in the "ON" position, the
seat belt warning light will come on and the
warning chime will sound for about 6 sec-
onds.
1-
13
| Categories | Hyundai Elantra Manuals, Hyundai Manuals |
|---|---|
| Tags | Hyundai Elantra 2.0 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Elantra |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(3 votes, average: 4 out of 5)
Automotive readers have rated 2003 Hyundai Elantra Owners Manual 4.0 out of 5.0 based on 3 product reviews. it is wonderful manual thanks alot