DRIVING YOUR HYUNDAI 2- 19
C190C01Y-GAT
Trailer Brakes
C190E03L-GAT
Trailer Weight Limit
do so, and allow the engine to
idle until it cools down. You may
proceed once the engine has
cooled sufficiently.
Ifyourtrailerisequippedwithabraking
system, make sure it conforms to fed-
eral and/or local regulations and that it
is properly installed and operating cor-
rectly.
C190D01A-GAT
Safety Chains
NOTE:
Should the hitch connection between
your car and the trailer or vehicle you
are towing fail, the trailer or vehicle
couldwanderdangerouslyacrossother
lanes of traffic and ultimately collide
with another vehicle. To eliminate this
potentially dangerous situation, safety
chains,attachedbetweenyourcarand
the trailer or towed vehicle, are re-
quired in most provinces.
If you tow a trailer or vehicle, your
carwillrequiremorefrequent main-
tenance due to the additional load.
See "Maintenance Under Severe
Usage Conditions" on page 5-6.
Tongue load
Total trailer weight
C190E01L
Tongue loads can be increased or
decreased by redistributing the load in
the trailer.
This can be verified by checking the
total weight of the loaded trailer and
then checking the load on the tongue.
!
CAUTION:
o Neverconnectatrailerbrakesys-
tem directly to the vehicle brake
system.
o When towing a trailer on steep
grades (in excess of 12%) pay
closeattentiontotheenginecool-
ant temperature gauge to ensure
the engine does not overheat. If
the needle of the coolant tem-
peraturegaugemovesacrossthe
dial towards "H" (HOT), pull over
and stop as soon as it is safe to
NOTE:
1.
Never load the trailer with more
weight in the back than in the
front. About 60% of the trailer
load should be in the front half
on the trailer and the remaining
40%
in the rear.
Product Specification
Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Grandeur |
Document File Type | |
Copyright | Attribution Non-commercial |