4-
4 CORROSION PREVENTION AND APPEARANCE CARE
trol chemicals are used, you should
pay particular attention to the under-
side of the car. Start by rinsing the car
to remove dust and loose dirt. In win-
ter, or if you have driven through mud
or muddy water, be sure to thoroughly
clean the underside as well. Use a
hard direct stream of water to remove
accumulations of mud or corrosive
materials. High pressure car washes
maycausewatertoenteryourvehicle.
Use a good quality car-washing solu-
tion and follow the manufacturer's di-
rections on the package. These are
available at your Hyundai dealer or
auto parts outlet. Don't use strong
householddetergents,gasoline,strong
solventsorabrasivecleaningpowders
as these may damage the finish.
To clean whitewall tires, use a stiff
brush or soapy steel-wool scouring
pad.
To clean plastic wheel covers, use a
clean sponge or soft cloth and water.
After rinsing, dry the car using a damp
chamois or soft, absorbent cloth. The
reason for drying the car is to remove
water from the car so it will dry without
water spots. Don't rub, this can dam-
age the finish.
To clean cast aluminum alloy wheels,
use a mild soap or neutral detergent.
Do not use abrasive cleaners. Protect
the bare-metal surfaces by cleaning,
polishing and waxing. Because alumi-
num is subject to corrosion, be sure to
give aluminum alloy wheels special
attention in winter. If you drive on
salted roads, clean the wheels thor-
oughly afterwards.
If you find any nicks or scratches in
the paint, use touch-up paint to cover
them to prevent corrosion. To protect
the paintwork of the car against corro-
sion, you must clean your Hyundai (at
least once a month). Give special at-
tention to the removal of salt, mud and
other substances on the underside of
the splashboards of the car. Make
sure that the outlets and the underside
of the doors are open. Paint damage
can be caused by small accumulation
oftar,industrialprecipitation,treeresin,
insects and bird droppings, when not
removedimmediately.Ifwateraloneis
notstrongenoughtoremovetheaccu-
mulated dirt, use a mild car washing
solution. Be sure to rinse the surface
after washing to remove the solution.
Never allow the solution to dry on the
painted surfaces.
After washing, be sure to rinse thor-
oughly. If soapy water dries on the
finish, streaking will result.
Use a clean sponge or cloth, rinse it
frequently and don't damage the finish
byrubbingtoohard.Forstubbornspots,
dampen them frequently and remove
them a little at a time.
When the weather is warm and the
humidity low, you may find it neces-
sary to rinse each section immediately
after washing to avoid streaking.
Categories | Hyundai Manuals, Hyundai Grandeur Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Grandeur |
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)