Dynamic Stability Control (DSC)
93
The concept
The vehicle will remain completely
operational, however, without DSC. In
the event of a fault, please consult your
BMW center.
DSC maintains vehicle stability, even in
critical driving situations.
DSC is operational every time you start
the engine.
Indicator and warning lamps for
Canadian models.
DSC contains the Dynamic Traction
Control (DTC) and Cornering Brake
Control (CBC) functions.
Indicator lamps
The indicator lamp in the instru-
ment cluster goes out shortly
after you switch on the ignition,
refer to page 19.
Deactivating the DSC/activating
the DTC
Press the DSC button briefly; the indi-
cator lamp comes on and stays on.
>
The indicator lamp flashes: DSC is
actively controlling drive torque and
braking intervention
DSC is deactivated; DTC is operational.
In the following rare situations, it may
prove useful to activate the DTC for a
brief period:
>
The indicator lamp stays lit: DSC has
been switched off with the button;
DTC and DBC are operational. DTC
control intervention is not indicated.
>When rocking the vehicle or starting
off in deep snow or on loose surfaces
>When driving with snow chains
>When driving on snow-covered
grades, in deep snow, or on a snow-
covered surface that has been
The indicator lamp and the
brake warning lamp continu-
ously light up in yellow:
The DSC, DTC and DBC have
been switched off manually or
there is a system malfunction.
packed down from being driven on.
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 330i, BMW 330xi, BMW E46 |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)