4.
5.
Turn the bulb holder to the left and pull
out
Remove and replace the bulb.
Sidemarker
Bulb 5 watts, WY5W ST
The bulb can be replaced via a cover at the
front of the wheel well, refer to the descrip-
tion for turn signal lamp 2.
1.
The bulb holder of the sidemarker lamp
is located toward the outside of the
vehicle next to the bulb holder of turn
signal lamp 2
1
2
3
4
Turn signal
Roadside parking, rear and brake lamp
Backup lamp
Reflector
2.
3.
Turn the bulb holder to the left and pull
out
Rear turn signals
Remove and replace the bulb.
Side turn signals
Bulb 21 watts, PY 21 W
The illustration shows the recess on the left
side of the luggage compartment.
Bulb 5 watts, WY 5 W
1.
Remove the cover
1.
Press against the front edge of the lamp
with the tip of your finger, then push it to
the rear, release the detent at the front
and take it off the trim strip
2. Unclip the bulb holder and remove
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and
replacement.
2.
3.
Turn the bulb holder 905 to the left and
remove
License plate lamps
Remove and replace the bulb.
Tail lamps
The roadside parking, rear and brake
lamps are LEDs. The backup lamps
are fitted with longlife bulbs. Please con-
tact a BMW center in case of a malfunc-
tion.<
Bulb 5 watts, WY 5 W
180
Online Edition for Part No. 01 41 0 157 980 - 01/04 BMW AG
Product Specification
Categories | BMW 6-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 645Ci, BMW E63, BMW E64 |
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |