2004 BMW Z4 2.5i 3.0i E85 E86 Owners Manual

the ignition key immediately when the
move the selector lever to neutral position
engine starts.<
N again.<
Extended starting attempts, charac-
terized by excessively frequent or
long periods with the starter engaged, can
damage the catalytic converter.<
Before leaving the vehicle with the
engine running, place the selector
lever in position N and pull the parking
brake.
Do not leave the vehicle unattended with
the engine running. An unattended vehicle
with a running engine poses a safety haz-
ard.<
If the engine fails to start on the first
attempt, for instance if it is very hot or cold:
>
Press the accelerator pedal halfway
down.
Cold starts at very low temperatures, start-
ing at approx. 57/–156:
Switching off the engine
Do not remove the ignition key while
the vehicle is still moving. If you did
so, the steering lock would engage when
the steering wheel is turned.
When you leave the vehicle, always remove
the ignition key and engage the steering
lock.
>
>
Press the accelerator pedal halfway
down.
On the first start attempt, engage the
starter for a longer period, approx.
10 seconds.
Manual transmission
Always engage the parking brake when
parking on downhill roads.<
1.
2.
3.
4.
Engage the parking brake
Gearshift lever in idling position
Depress clutch pedal
You can have an acoustic signal set
as a reminder that the ignition key is
still in the ignition switch after the driver's
door has been opened.<
Start the engine.
Automatic transmission
Manual transmission
1.
2.
3.
Depress footbrake
Turn the ignition key to position 1 or 0.
Place selector lever in position P or N
Start the engine.
Automatic transmission
Place the selector lever in position P and
turn the ignition key to position 1 or 0.
Before leaving the vehicle with the
engine running, place the selector
lever in position P and pull the parking
brake.
Do not leave the vehicle unattended with
the engine running. An unattended vehicle
with a running engine poses a safety haz-
ard.<
Sequential manual gearbox SMG
If you turn the ignition key to position 1 or 0
with the selector lever in position R, or in
sequential mode, a gear automatically
remains engaged.
If you turn the ignition key to position 1 or 0
with the selector lever in neutral position N,
a warning tone and the flashing gear indi-
cator in the display remind you that the
vehicle is not secured against rolling.
Sequential manual gearbox SMG
1.
2.
Depress footbrake
Move selector lever to neutral
position N
The warning stops after approx. 9 seconds.
3.
Start the engine.
Always engage the parking brake
when parking on downhill roads.
Engaging a gear may not sufficiently secure
the vehicle against rolling.<
If the engine does not start, re-
engage the gear last selected, refer to
the display in the instrument cluster, and
37
Online Version for Part No. 01 41 0 157 498 - � 10/03 BMW AG
Product Specification
CategoriesBMW Manuals, BMW Z-Series Manuals
Tags, , , ,
Model Year2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 120 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field