Replacement procedures
Onboard tool kit
Lamps and bulbs
The lamps and bulbs make essential contri-
butions to the safety of your vehicle. There-
fore, comply fully with the following instruc-
tions during bulb replacement. If you are
not familiar with the procedures, BMW rec-
ommends that you have your BMW center
carry out the work.
Do not touch the glass portion of
a new bulb with your bare hands
since even small amounts of impurities
burn in to the surface and reduce the ser-
vice life of the bulb. Use a clean cloth,
paper napkin or a similar material, or hold
the bulb by its metallic base.<
The onboard tool kit is stored in a tool
pouch. It is located in the luggage compart-
ment beneath the floor panel.
A replacement bulb set is available from
your BMW center.
Windshield wiper blades
Before working on the electrical sys-
tem, switch off the electrical acces-
sory you are working on or disconnect the
cable from the negative terminal of the bat-
tery. Failure to observe this precaution
could result in short circuits.
To prevent injuries and damage, always
comply with any instructions provided by
the bulb manufacturer.<
Accessing the headlamps
1.
2.
3.
4.
5.
Fold the wiper arm completely out from
the windshield
Protective cover in the wheel well
Position the wiper blade at an angle and
pull the release spring, see arrow
Fold the wiper blade down and unhook
it toward the windshield
Pull the wiper blade past the wiper arm
toward the top
Insert a new wiper blade and apply
pressure until you hear it engage.
To gain access to the headlamp covers,
turn the front wheels in the required direc-
tion.
88
Online Version for Part No. 01 41 0 157 498 - � 10/03 BMW AG
| Categories | BMW Manuals, BMW Z-Series Manuals |
|---|---|
| Tags | BMW 2.5i, BMW 3.0i, BMW E85, BMW E86, BMW Z4 2.5i |
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)