J56J_8S11-EA-03G_Edition1.book
Page 6 Tuesday, June 24, 2003 6:29 PM
Driving Your Mazda
Starting and Driving
Releasing the parking brake
w Brake System Warning Light
Depress the brake pedal, then pull the
handle up and press the button. Lower the
handle to the release position while
holding in the button.
This warning has the following functions:
Parking brake warning
The light comes on when the parking
brake is applied with the ignition switch
in the START or ON position. It goes off
when the parking brake is fully released.
Low brake fluid level warning/
Electronic brake force distribution
system warning
If the light stays on after the parking brake
is fully released, you may have a brake
problem.
Drive to the side of the road and park off
the right-of-way.
Low brake fluid level warning
You may notice that the pedal is harder to
push or that it may go closer to the floor.
In either case, it will take longer to stop
the vehicle.
1.
2.
With the engine stopped, check the
brake fluid level immediately and add
fluid as required (page 8-16).
After adding fluid, check the light
again.
5-6
Form No. 8S11-EA-03G
Product Specification
Categories | Mazda 6 Manuals |
---|---|
Model Year | 2004 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
i bouth this car and i need the manual
Convenient. Needed Content. Thanks.